Prime Zahariou Products

ALUMINIUM- S450

Two chambers lift-and-slide system with thermal break on aluminium.

s450-1.jpgs450-2.jpg

Cross – section (sash) 45 mm width.
Sashes slide on stainless steel rails.
High thermal conductibity coefficient Uf=3,4 - 4,4 W/ m2K.
Glass panes with two glass sheets and thermal conductivity coefficient Ug up tp 1,0 W/m2K can be used.
Multiple lockings (Inline Lock)
Special hardware that lifts the sash capable of lifting up to 90 and 150 kgs.

ALUMINIUM- Μ20000

Opening (turn-and-tilt) system with thermal break on aluminium designed to be equipped by steel hardware and circumferential lockings.

m20000.jpg

Cross – section (sash) width 70 mm.
Achieves thermal conductivity coefficient Uf 2,5 W/ m2K. Glass reinforced polyamides 20 – 24 mm thick are used for that purpose.
Glass units can be installed up to 46 mm thick. Glass panes with three glass sheets and thermal conductivity coefficient Ug up to 0,5 W/m2K can be used.
Equipped with steel hardware with circumferential lockings.
Special profiles, suitable for main entrance's manufacturing, are available.

ALUMINIUM- PRIME THERMO

Opening (turn-and-tilt) system with thermal break on aluminium equipped with steel hardware and circumferential lockings.

Sash width 61 mm.
Thermal insulation coefficient Uf 2,8 W/m2K. Glass reinforced polyamides 20-24mm thick are used for that.
Glazing panes with two glass sheets and thermal conductivity coefficient Ug up to 1,0 W/m2K.

ALUMINIUM- SUPREME- S600 Phos

Sliding system with thermal break on aluminium, specially designed for very big openings, that offers impressive specifications.

ARCH_2011_EnDe_S600_2.jpgS6002.jpg


The frame and the sashes of the system are implemented into the floor, the ceiling and the walls.
There is no restriction regarding the maximum dimensions of the door; it can be as big as the selected glazing allows
High thermal conductivity coefficient Uf = 1,0 W/m2K.
Special locking hardware located on the meeting profile of the sashes and on the "hidden" frame.
Glazing pane consisting of three glass sheets with thermal conductivity coefficient Ug up to 0,5 W/m2K.
Heavy duty rollers capable of moving up to 300 kg

ALUMINIUM- SUPREME- S700

Lift-and-slide system with thermal break on aluminium specially designed for huge openings with impressive technical details.

ARCH_2011_EnDe_S700_5.jpgS700_3.jpg

Cross – section (sash) height 84 mm.
Reinforced aluminium profiles allow constructions of up to 3 meters in height to be manufactured.
High thermal conductivity coefficient Uf 2,8 W/m2K.
Glass reinfrorced polyamides 24 mm thick are used, not allowing the "banana" effect to appear.
Glazing pane consisting of three glass sheets with thermal conductivity Ug up to 0,5 W/m2K can be used.
Threshold that can be implemented to the floor.
Maximum weight of each sash 400 kg.

ALUMINIUM- SUPREME- S80

Opening (turn-and-tilt) system with thermal break on aluminium designed to achieve elegancy while the less possible aluminium profiles are visible.

ARCH_2011_EnDe_S80_1.jpgARCH_2011_EnDe_S80_4.jpg

Cross – section (sash) width 82,5 mm.
High thermal conductivity coefficient Uf 1,73 W/m2K. Glass reinforced polyamides 38 mm thick are used.
Glazing (glass panes with three glass sheets ) thick up to 46 mm with thermal conductivity coefficient Ug up to 0,5 W/m2K can be installed.
Rebates, transom and mullions profiles have all the same width: 67 mm.
Firm and sturdy constructions due to the 80 mm thick frame.

ALUMINIUM- SUPREME- S60

Opening (turn-and-tilt) system  highly efficient regarding the energy losses.

ARCH_2011_EnDe_S60_1.jpgs60.jpg

Cross – section (sash) width 84 mm

Suitable for "window wall" applications

Thermal break from glass reinforced polyamides 38 mm thick are used. If polyurethane bars are used, too, the system can achieve thermal conductivity coefficient Uf = 0,98 W/m2K.

Glass panes with three glass sheets and thermal conductivity coefficient Ug up to 0,5 W/m2K can be installed.

Typologies with hidden sash can also be manufactured.

ALUMINIUM-CURTAIN WALL- M6 SOLAR STANDARD ALUTHERM

Curtain wall system that emphasizes on thermal insulation, simplicity of installation and the improvement of the drainage system. Wide range of applications from the simplest ones to the most sophisticated inclined and curved applications.

m6-1.jpgm6-2.jpg

Certified by the IFT ROSENHEIM institute. Achieved the highest ranking category in every test that underwent (wind pressure, air permeability, mechanical fatigue, thermal insulation, water permeability) and thermal conductivity coefficient Uf = 1,5 W/m2K.
Frame width 55 mm.

Capability of Structural Glazing with fixes glass units, with no visible aluminium profiles from the external
Glass unit consisting of three glass sheets with thermal conductivity coefficient Ug up to 0,5 W/m2K.
Wide range of applications, from the simplest ones to the most sophisticated inclined and curved applications and skylights, as well.
Available profiles that allow wide grids.
Parallel opening windows can be implemented on the construction. Doors from other Alumil series can be implemented, as well.

ALUMINIUM- CURTAIN WALL- M50 ENERGY

Curtain Wall system with visible pressure caps and special specification the use of the same cross – section vertically and horizontally.

m50-1.jpgm50-2.jpg

Same profile for mullions, transoms and frames with visible width 50 mm.
'Straight' look internally
Cores from industrial steel profiles
Capability of Structural Glazing with fixed glass panes and no visible aluminium profiles from the external
Glass unit consisting of three glass sheets with thermal conductivity coefficient Ug up to 0,5 W/m2K can be used.
Thermal conductivity coefficient Uf from 1,0 to 1,8 W/m2K
Cerified by the IFT ROSENHEIM institute. Achieved the highest ranking category of every test that underwent (air pressure, air permeability, mechanical fatigue, thermal insulation, water permeability)

WOOD/ALUMINIUM- Μ23300 FORESTAL

Heavy duty lift-and-slide system with thermal break on aluminium and combination of aluminium and wood.

m23300.jpg

Cross – section (sash) height 106,5 mm
Solid oak wood clad of 19 mm from the internal
Thermal conductivity coefficient Uf = 1,8 W/m2K. Glass reinforced polyamides 15 and 24 mm thick are used for insulating purposes.
Glass unit, consisting of three glass sheets with thermal conductivity coefficient Ug up to 0,5 W/m2K, can be used.
Hardware consisting of steel rollers on an inox rail are used.
Maximum weight of each sash 250 kg.
Typologies where the sash, the shutter and the flyscreen can be implemented into the wall when opened can be manufactured.

WOOD/ ALUMINIUM- PRIME WOOD SLIDE

Thermally insulated sliding system combining aluminium and wood.

wood_slide.jpg

Cross – section (sash) height 77,5 mm.
Solid oak wood clad of 19 mm from the internal
Stainless steel rail
Glass unit, consisting of two glass sheets with thermal conductivity Ug up to 1,0 W/m2K, can be installed.
Multiple lockings (Inline lock)
Maximum weight of each sash 130 kg.
Typologies where the sash, the shutter and the flyscreen can be implemented into the wall when opened can be manufactured.

WOOD/ ALUMINIUM- PRIME WOOD 2.5

Opening (turn-and-tilt) system made from wood and aluminium in combination, with perfect functionality and aesthetics and zero maintenance requirements.

wood25.jpg

Cross – section (sash) width 74 mm.
Solid oak wood clad of 19 mm from the internal
Thermal conductivity coefficient Uf = 2,5 W/m2K
Glass pane (consisting of two glass sheets with thermal conductivity coefficient Ug up to 1,0 W/m2K) can be used.
Steel hardware with circumferential lockings.
Special profiles that allow main entrance's manufacturing are available.

WOOD/ ALUMINIUM- PRIME WOOD 1.4

Opening (turn-and-tilt) system made from wood and aluminium in combination with thermal break on aluminium, with perfect functionality and aesthetics and zero maintenance requirements.

wood14-1.jpgwood14-2.jpg

Cross – section (sash) width 91,5 mm.
Solid oak wood clad of 19 mm from the internal
Thermal conductivity coefficient Uf = 1,4 W/m2K. Glass reinforced 18 mm polyamides are used on the aluminium plus the extra insulation from the wood clad.
Glass panes (consisting of three glass sheets with thermal conductivity coefficient Ug up to 0,5 up to W/m2K) 46 mm thick can be installed.
Steel hardware with circumferential lockings.
Special profiles that allow main entrance's manufacturing are available.

PVC- VEKA SOFTLINE 70

Opening (turn-and-tilt) system from uPVC equipped with circumferential locking hardware.

softline70.jpg

Cross – section (sash) width 70 mm
Thermal conductivity coefficient Uf = 1,4 W/m2K.
Five insulating chambers.
Steel core 1,5 mm thick.

PVC- KOEMMERLING 88 PLUS

Opening (turn-and-tilt) uPVC system that achieves very high efficiency regarding the thermal insulation.

88plus.jpeg

Cross – section (sash) width 88 mm.
Thermal conductivity coefficient Uf = 1,0 W/m2K.
Glazing unit up to 54 mm thick, consisting of three glass sheets with thermal conductivity coefficient up to 0,5 W/m2K, is used.
Steel core 1,5 – 2 mm thick.
100% recyclable and enviroment friendly.

PVC-KOEMMERLING EUROFUTUR CLASSIC

Opening (turn-and-tilt) uPVC system highly efficient in terms of thermal insulation.

eurofutur_classic.jpg

Cross – section (sash) width 82 mm
Thermal conductivity coefficient Uf = 1,3 W/m2K.
Steel core 1,5 – 2 mm thick.
100% recyclable and enviroment friendly.

PVC-KOEMMERLING EUROFUTUR ELEGANCE

Opening (turn-and-tilt) uPVC system that achieves high efficiency regarding the thermal insulation.

eurofutur.elegance.jpg

Cross – section (sash) width 82 mm
Thermal conductivity coefficient Uf = 1,3 W/m2K.
Steel core 1,5 – 2 mm thick.
100% recyclable and enviroment friendly.

 

Contact Information

PRIME
1st klm Chrysoupolis Junction – Kavala
Post Office Box 175
Postal Code 642 00
Chrysoupolis
Greece
+30 25910 23949, +30 25910 41696,
+30 25910 23266 (fax)
www.zprime.gr
This email address is being protected from spambots. You need JavaScript enabled to view it.

Portfolio